Water filters

Frequently asked questions:

What types of water filters are available?

The «Cerama Market» website offers water filters compatible with the Hansgrohe Agittura M91 kitchen mixer system. These filters are equipped with MINTEC technology, which ensures high-quality water filtration while enriching it with beneficial minerals. You can order the following types of water filters from us:

• activated carbon filters: act as a sorbent, absorbing impurities and unpleasant odors;
• ion exchange and activated carbon filters: purify water from contaminants and bad odors, reduce the levels of iron and other substances that cause water hardness;
• mineralization filters: reduce harmful substances, eliminate unpleasant odors, and enrich the water with beneficial minerals.

What are the best water filters in 2024?

The best water filters in 2024 are mineralization filters from the German manufacturer Hansgrohe. They reduce harmful substances, eliminate unpleasant odors, improve the taste of water, and enrich it with essential minerals.

What is the price of water filters in 2024?

The price of water filters in2024  on the «Cerama Market» website ranges from 4438 UAH to 6900 UAH. 

How often should you replace a water filter?

A water filter should be replaced every 6–12 months, depending on its capacity. For example, a Hansgrohe filter with an ion exchanger and activated carbon (designed for 800 liters) is suitable for one year of use.

How to Connect a Water Filter?

To properly connect a water filter, follow these steps:

1. Choose the installation location. Ensure the filter doesn’t interfere with other appliances.
2. Set the correct height. Position it at a convenient height for cartridge replacement, with an optimal distance of 10 cm from the bottom of the filter to the surface.
3. Turn off the water supply. Open the nearest faucet to drain any remaining water in the pipe.
4. Drill a hole in the drainage pipe. Tighten the clamp screws securely to ensure a tight fit.
5. Install a shut-off valve before the filter to control water flow into the housing.
6. Connect the system using couplings. Ensure all connections are watertight. If not, use a sealant to fix leaks.
7. Insert the cartridge into the housing and attach it to the upper part of the device.
8. Perform a test run to ensure proper installation. Open the shut-off and water intake valves. If any issues are detected, turn the water off again, drain the excess water, and recheck all connections to fix any errors.